GALAXY "UNIVERSAL INVESTMENT"
FOR ALLOYS AND PRESSABLES

• Galaxy "Universal Investment" provides superior investment performance for all PFM and pressables.  
• It provides creamy texture for smoother castings. It is also fast and accurate with a  15 minute setup.
• It can be placed directly into a hot oven for a quick burnout.   It comes  in either 60 or 100 gram envelopes.  Use our 20cc syringe for accuracy in measuring investment liquid and water.

BEAUTY-CAST INLAY INVESTMENT™

The Hygroscopic Technique with BEAUTY-CAST™ is as simple and quick as the High Heat Technique, but the results are much more uniform. The use of a water bath (HYGROBATH) at 37.8 degrees C (100 degrees F) automatically brings all patterns to uniform temperature, softening the wax enough for even expansion of the investment. Combined, the wax expansion and the high hygroscopic expansion compensate for most of the gold shrinkage, and thus the low temperature burnout at 480 degrees C (900 degrees F) provides the balance of the required mold expansion.

• The proven standard for the Hygroscopic Technique

• Also excellent for the High Heat Technique

SOLDERING INVESTMENT

Multi-purpose SOLDERING INVESTMENT is ideal for soldering all types of dental alloys, including chrome-cobalt. Its fine texture mixes readily with water to a smooth, stackable consistency that invests easily. Heat-shock resistance and high strength enable it to withstand being dried out or flushed with boiling water. This improved soldering investment is strong, yet easy to devest.

Speed E: For low-fusing precious metals
SPEED-E is a fast-setting investment with very high permeability and outstanding heat-shock resistance. This enables it to be dried significantly faster after setting. It shapes and trims easily, yet has adequate strength. Whenever time is a factor, SPEED-E is the answer.

Hi-Heat: For high-fusing precious metals HI-HEAT Soldering Investment is a gypsum-bound investment that is ideal for any soldering job that requires the use of an oxygen-gas torch, or where an unusually fine and smooth soldering investment is wanted. Excellent for use with high-fusing ceramic alloys for both the pre- and post-soldering technique. Can also be used for soldering precision attachments.

• Flows freely into smallest crevice
   
• Stacks and molds easily
   
• Sets moderately fast
   
• Trims smoothly
   
• Withstands rapid drying out

FORMULA 1

Universal investment for all alloys and pressable ceramics. This high-performance, universal investment works equally well for all alloys and pressable ceramics. Its wide expansion range allows the technician to achieve optimal fit using the rapid or standard burnout technique. The robust bimodal nature of FORMULA 1 strengthens molds and promotes easier divesting when working on more fragile materials such as all-ceramic restorations. Using only a 15-minute bench set and 30-minute burnout, FORMULA 1 reduces processing time and increases lab productivity.

A carbon-free, fine-grain phosphate bonded investment for casting crown and bridge and ceramic alloys. This versatile all-purpose investment has been specially formulated to use with a rapid burnout technique. It can be used both with a metal ring and a ringless technique without cracking. POWERPLUS LIQUID provides the high expansion especially needed for non-precious alloys and can be diluted as needed for other alloys.

• Crack resistant and tolerant to rapid temperature rise
• Can be used both with ring or ringless technique
• Easy breakout for faster cleanup
• Smooth, accurate castings reduce finishing time

CERA-FINA

Carbon-free fine grained investment for high fusing alloys. CERA-FINA is a carbon-free phosphate investment developed for professionals who demand a more finely grained investment. It is designed for use with all classes of casting alloys: precious, semiprecious, and non-precious.

• Extremely fine texture results in accurate castings with very smooth surfaces
• Extended working time, as much as 10 minutes, allows the investing of multiple flasks
• Absence of carbon assures compatibility with all casting alloys, especially Palladium and non-precious
• Increased liquid to powder ratio yields a creamier mix and allows better flow, resulting in bubble-free castings

800016   100 x 60g

$89.99

$79.99