Dorado Dental Supply - Quality Proven Alloys, Dental Laboratory Merchandise and Equipment

Parameter	Powder & Paste Opaque	Margin	Body/Incisal	Natural Glaze	ISIS Porcelain Glaze	**Add-On
Low Temp (TI)	1000ºF (540ºC)	1000ºF (540ºC)	1000ºF (540ºC)	1000ºF (540ºC)	1000ºF (427ºC)	1000ºF (540ºC)
Pre-Dry Time	6 Min (6-8 min for Paste)	6 Min	6 Min	6 Min	6 Min	6 Min
Rate	*100º F/Min (55ºC/Min)	*100º F/Min (55ºC/Min)	*100º F/Min (55ºC/Min)	*100º F/Min (55ºC/Min)	*100º F/Min (55ºC-70ºC/Min)	*100º F/Min (55ºC/Min)
Vac Level	≥ 28"/7 10 mm	≥ 28"/7 10 mm	≥ 28"/7 10 mm	0	Optional ≥ 28"/7 10 mm	Optional ≥ 28"/7 10 mm
Vac Start	1000ºF (540ºC)	1000ºF (540ºC)	1000ºF (540ºC)	NA	Optional 900ºF (480ºC)	Optional 1000ºF (540ºC)
Vac Release	1730ºF (998ºC)	1700ºF(927ºC)	1670ºF(910ºC)	NA	50ºF (10ºC)	1500ºF (816ºC)
High Temp (T2)	1830ºF (998ºC)	1800ºF(982ºC)	1770ºF (965ºC)	1720ºF (940ºC)	1400-1700ºF(760-927ºC)	1675ºF (912ºC)
Hold	0 min	0 min	0 min	0 min	0 min	0 min
Cool Time	1 min	1 min	1 min	1 min	1 min	1 min

* A starting rate of 100ºF/Min (55ºC/min) is recommended for powder porcelain. If an ideal appearance is not achieved, the rate may be reduced by up to 25ºF/min (13ºC/min) to correct for a white or milky appearance.

** Add-On porcelain is intended for making small corrections to finished restorations, vacuum is optional for Add-On porcelain. Shades are accurate without vacuum, but translucency of incisal Add-On is increased with vacuum.

Dorado Dental Supply, Inc.
1010 University Ave #466
San Diego, CA 92103
800-215-6930
fax: 619-330-2552
email: info@doradodentalsupply.com